Supporting article

Specification management for food and consumer goods manufacturers

Christopher Fresca, Enterprise Solutions Architect

Quality and R&D teams reviewing governed product specification records

A food product specification is the approved document that defines a product's formula and the limits it must meet. It also defines how the product is packed and what its label must declare. Specification management keeps finished goods specifications correct and versioned, along with the specifications for raw materials and packaging. Every plant then makes the same product to the same rules, and you can prove which rules applied to any batch.

What a specification is

A specification is the signed agreement on what a material or product must be, written as limits someone can check. A formula tells the plant how to make something, while the specification sets the result the product must meet. In practice, specifications form a hierarchy. Finished product specifications sit at the top and point down to the raw material and packaging specifications they're built from. When a lower-level specification changes, every finished product that uses it needs review. If your system can't show those links, you'll find out about the impact from a complaint instead of a report.

What a product specification contains

A finished product specification holds everything needed to make and release the product, along with the information required for its label. The fields fall into groups, and each group has a different owner.

Composition and formulation

This group covers the recipe as approved quantities and the raw material specifications it calls on. It also covers the processing steps that change the product, such as cooking or fermentation. Compound ingredients need their sub-ingredients listed, because those flow straight into the label.

Limits the product must meet

Quality sets the release criteria here. The usual groups are:

Physical limits: weight, moisture and particle size.

Chemical limits: fat, salt and contaminants.

Microbiological limits with sampling plans.

Sensory standards with reference samples.

Labelling and claims data

Regulatory data turns the formula into what the consumer reads. In the EU, Article 9 of Regulation (EU) No 1169/2011 lists the ingredient list and net quantity among the mandatory particulars. Claims such as "high in protein" also belong here, along with the evidence behind them.

Raw material specifications

A raw material specification sets the limits a supplier's ingredient must meet before you accept it. The BRCGS Global Standard Food Safety Issue 9 says these specifications "shall include defined limits for relevant attributes" that affect safety or quality. It names chemical and microbiological standards. It also names physical and allergen standards. Allergens deserve the most attention because, in Esko's review of 2025 FDA recalls, allergen mislabeling caused 115 of 251 recalls, or 45.8%.

Sugar needs a short specification, while a seasoning blend needs a full sub-ingredient breakdown that covers carriers and processing aids. The blend's specification also needs to identify the allergens handled in the supplier's factory. So check every compound ingredient for a complete breakdown, because that's where undeclared allergens get in.

Packaging specifications

A packaging specification defines the material and dimensions of every pack component. It also records each component's print and whether it's safe for contact with the food. Primary packaging touches the product, so it carries the legal weight. Under Regulation (EC) No 1935/2004, food contact materials must not transfer constituents that could endanger health or change the food unacceptably. Where specific EU measures exist, as they do for plastics, the material must come with a written declaration of compliance. Secondary packaging such as cases and pallets mostly needs dimensions and strength values for the line and the warehouse. Before you approve a pack, check that the specification links to the declaration's current version and to the approved artwork.

Who approves a specification

The approval sits with named roles, one for each part of the specification. R&D owns the formula, and quality owns the limits. Regulatory affairs owns the label data. Packaging technologists sign their own components, and procurement confirms the supplier is approved. The mix of signatures depends on the change. A new supplier for an existing ingredient needs only quality and procurement. A formula change that moves an allergen or a claim needs every owner. What breaks approval is shared ownership: when two teams can edit the same field, neither feels responsible for it. Give each field one owner, and write down which changes trigger which approvers.

In what order

Specifications get approved from the bottom of the hierarchy up, because each level takes its data from the one below:

  1. Approve the raw material specifications and supplier documents.
  2. Approve the packaging component specifications and their compliance declarations.
  3. Build the formula only from approved materials.
  4. Generate the ingredient list, allergen statement and nutrition values from the formula.
  5. Set the finished product's release limits and sampling plans.
  6. Sign off the finished product specification and release it to the plants and the Enterprise Resource Planning (ERP) system.

Teams that reverse this order and draft the label before the material data end up with labels that don't match the ingredients. If you change step 1 or 2 later, the steps above it have to be checked again.

Which version was in force

You need to show which specification version applied to any batch, on the day it was made. That takes a version number and an effective date on every specification. Each production lot must also link to the version used. FSNS counted 101 allergen recalls in 2024, 34% of the total, and each of those investigations started with the question of which version was used. Retention rules vary by market. In the US, 21 CFR 117.315 requires records to be kept for at least 2 years after they were prepared. Test yourself: pick a lot from last year and see how long it takes to produce the specification it was made to.

Templates across categories

Category-specific templates can share a common core. A biscuit and a dish soap use the same fields for identity and version. They also share fields for owner and status. Approval history and links to materials follow the same structure for both. The category-specific parts sit on top of that core. Food needs nutrition and allergen modules. Beauty products need International Nomenclature of Cosmetic Ingredients (INCI) names, and home care needs hazard classification data. The usual mistake is one giant template with hundreds of optional fields, which nobody fills in the same way twice. Check how many fields in your current template are left blank on most specifications. Those fields probably belong in a category module.

Templates across plants

Plants should share a global specification and add only the data that is local to them. Local data covers line settings and local suppliers. It also covers plant-approved alternates. The product definition isn't. The rules a plant applies depend on the markets it ships to, so a plant that exports needs every target market's requirements in its template:

RequirementEUUSWhat the specification must hold
Major allergens to declare14 listed allergens under Annex II of Regulation 1169/20119 major allergens, sesame added from 1 January 2023Allergen status mapped to both lists
Record retentionSet by national rules and certification schemesAt least 2 years under 21 CFR 117.315Archived versions with effective dates
Food contact packagingDeclaration of compliance where specific measures applyCovered by separate FDA food contact rulesLink to current declaration per component

Check that a plant can't release a product with a plant-level edit that changes the global definition.

Getting specification data from suppliers

Supplier data arrives most reliably through a structured questionnaire tied to your specification fields. Ask for the data in your format, field by field, and attach the supplier's own specification as evidence. BRCGS Issue 9 says questionnaires used for approval must be reissued at least every 3 years. Suppliers must also report significant changes in between. A Certificate of Analysis (CoA) proves one delivery met the limits, while the specification defines those limits. Large suppliers offer portals or standard data exports, and small ones will send email attachments. Either way, check that the supplier's document date matches the version you approved.

Next steps

Start with one finished product that sells in more than one market. Trace it down through every raw material and packaging specification, then back up to the label. Note where the data was retyped and where no owner signed. That trace shows you where a food product specification can drift from what the plant makes, and it tells you which part of the process to fix first. cpluspconsulting helps food and consumer goods manufacturers choose and implement Product Lifecycle Management (PLM) platforms for specification and formulation management, and makes sure teams use them. Book a 30-minute conversation.

FAQ

Check whether the change affects only supplier approval or also the ingredient data used in finished products. A new supplier for an unchanged ingredient needs quality and procurement approval. If the formula change affects an allergen or claim, every specification owner needs to approve it.

More articles

PLM for process manufacturers: the complete guide

PLM for process manufacturing: how formula-based PLM differs from discrete, where ERP, PDM and PIM take over, and the signs you have outgrown spreadsheets.

Regulatory compliance in Food product development

Food information regulation explained: what must legally appear on an EU food label, which foods are exempt, and where UK requirements now differ

Packaging specifications: why they are the weakest record in the product file

Packaging specification management: what the record must hold at component level, why supplier data decays, and how the pack file drives labels and artwork.

The EU packaging regulation and the product data you will need

PPWR regulation explained: what applies from 12 August 2026, the PFAS and recyclability limits, and the packaging data behind every declaration of conformity.

Product data management for process manufacturers

Product data management for process manufacturers rests on 3 decisions. Poor data quality costs $12.9 million a year on average, per Gartner.

PLM implementation for process manufacturers: a delivery model that holds

A plm implementation for process manufacturers runs in 4 phases. A first release takes 3 to 6 months and an enterprise rollout runs 12 to 24 months.

Specification management for food manufacturers: the complete guide

This guide explains food product specification management, with a 7-step approval order and the BRCGS Issue 9 review every 3 years.

New product development in consumer goods: the complete guide

This new product development guide for consumer goods compares three stage-gate options and four methods to rank projects against capacity.

Trace one product from label to supplier specs

C+P Consulting helps food and consumer goods manufacturers choose and implement PLM platforms for specification and formulation — and get teams using one governed record day to day.

Book a 30-minute conversation